Querying System Information - Hettich MIKRO 185 Bedienungsanleitung

EN
20.1

Querying system information

The following system information can be queried:
•
Device model and its maximum speed,
•
Program version of the device,
•
Type number of the device,
•
Device date of manufacture,
•
Device serial number,
•
Frequency converter type
•
Frequency converter program version
With the rotor at a standstill, the query can proceed as follows:
The procedure can be aborted at any time by pressing the
• Press and hold the button for eight
SELECT
seconds.

• Press the key.
SELECT

• Press the key.
START
PULSE
Device model and its maximum speed.
• Press the key.
SELECT
Program version of the

• Press the key.
SELECT
Type#1 : Type number of the

• Press the key.
SELECT
Type#2 : Continuation of the type number
if this has more positions than the
"Type#1" display

• Press the key.
SELECT
Device date of

Continued on next page
68/154
device.
device.
field.
manufacture.
Rev. 08 / 12.2022
STOP
OPEN
key.
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
Example:
>RCF< RPM t/min:s
Example:
>RCF< RPM t/min:s
Example:
>RCF< RPM t/min:s
Example:
>RCF< RPM t/min:s
AB1203DEENFRIT