Operating And Display Elements; Displayed Symbols; Control Panel Keys - Hettich MIKRO 185 Bedienungsanleitung

15

Operating and display elements

>RCF< RPM
RPM/RCF
15.1

Displayed symbols

Lid unlocked.
Lid locked.
Rotation display. The rotation display lights up, rotating counterclockwise, as long as the rotor is turning.
15.2

Control panel keys

•
RPM/RCF
Input the speed directly.
If the key is kept pressed, the value changes with increasing speed.
•
t
Input the runtime directly.
Adjustable in steps of 1 second up to a minute, and in steps of 1 minute starting from 1 minute.
•
Input the centrifuging parameters.
If the key is kept pressed, the value changes with increasing speed.
•
Selection key for activating the individual parameters.
SELECT
Every time the key is pressed, the next parameter is activated.
•
Call up the "MACHINE MENU" (keep the key pressed for 8 seconds).
•
In the "Machine Menu", select the menus "
•
Scroll forward in the menus.
•
Switching between the RPM display (RPM) and RCF display ( RCF ).
RCF
RCF values are displayed in parentheses
RPM Speed
RCF : Relative centrifugal acceleration
•
Start the centrifugation run.
START
PULSE •
Short-term centrifugation.
Centrifugation is run as long as the key is kept pressed.
•
Call up the menus "
•
Finish the centrifugation run.
STOP
OPEN
The rotor runs down with a pre-selected brake stage.
Pressing the key twice triggers the Emergency Stop.
•
Unlock the lid.
AB1203DEENFRIT
t/min:s
START
RCF
PULSE
t
STOP
SELECT
OPEN
Info", " Settings" and "
Rev. 08 / 12.2022
Info", " Settings" and "
.
Time & Cycles".
EN
Time & Cycles".
59/154