Automatic Unlocking Of The Lid After The Centrifugation Run - Hettich HAEMATOKRIT 200 Bedienungsanleitung

EN
18.4

Automatic unlocking of the lid after the centrifugation run

It can be set whether the lid should automatically unlock or not after the centrifugation run.
With the rotor at a standstill, this can be set as follows:
The procedure can be aborted at any time by pressing the
 Press and hold the button for eight
SELECT
seconds.

 Press the key until the following is
SELECT
displayed.

 Press the key.
START
PULSE

 Press the key until one of the following is
SELECT
displayed:
Lid AutoOpen : Automatic unlocking of
the lid after the centrifugation run.
off : Lid does not unlock automatically.
on : Lid unlocks automatically.

 With the keys, set off or on .
t

 Press the button to save the setting.
START
PULSE

 Press the key once to exit the "
STOP
OPEN
Settings"
menu or press twice to exit the "
MACHINE MENU ".
62/134
STOP
OPEN
key. In this case, the settings are not stored.
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
Rev. 07 / 05.2020
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
Example:
>RCF< RPM t/min:s
AB1801DEENFRIT