Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dual-input temperature transmitter
2.3
Certificates and approvals
On leaving the factory, the device was in perfect condition from the point of view of safety. The
device complies with the standards EN 61 010-1 "Protection Measures for Electrical Equipment
for Measurement, Control, Regulation and Laboratory Procedures" and with the EMC
requirements of IEC/EN 61326.
2.3.1 CE mark, declaration of conformity
The device meets the legal requirements of EU Directives. The manufacturer confirms a positive
completion of all tests by fitting the unit with a CE mark.
®
2.3.2 PROFIBUS
The device meets all the requirements of the following specifications:
Certified according to PROFIBUS
The device can also be operated with certified devices from other manufacturers
(interoperability).
An overview of other approvals and certificates can be found in the Operating Instructions.
3
Installation instructions
3.1
Incoming acceptance, transport, storage
3.1.1 Incoming acceptance
On receipt of the goods, check the following points:
• Are the contents or the packaging damaged?
• Is the delivery complete and is anything missing? Check the scope of delivery against your
order.
3.1.2 Transport and storage
Note the following points:
• Pack the device in such a way as to protect it reliably against impact for storage (and
transportation).
• The permitted storage temperature is -40 to +100 °C (-40 to 212 °F).
PA certification
®
PA profile 3.01+ profile 3.02
Installation instructions
27
Werbung
Inhaltsverzeichnis
