Scope Of Delivery; Certificates And Approvals; Installation; Incoming Acceptance, Transport, Storage - Endress+Hauser RMA42 Handbuch

RMA42
3.2

Scope of delivery

The scope of delivery of the process transmitter comprises:
• Process transmitter for DIN rail mounting
• Brief Operating Instructions and Ex documentation (optional) as hard copy
Please note the device accessories in the "Accessories" section of the Operating
Instructions.
3.3

Certificates and approvals

An overview of all available certificates and approvals is provided in the "Technical data"
section of the Operating Instructions.
3.3.1 CE mark
The measuring system meets the legal requirements of the applicable EC guidelines. These are
listed in the corresponding EC Declaration of Conformity together with the standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
3.3.2 EAC mark
The product meets the legal requirements of the EEU guidelines. The manufacturer confirms
the successful testing of the product by affixing the EAC mark.
4

Installation

4.1

Incoming acceptance, transport, storage

The permitted ambient and storage conditions must be observed. The precise specifications
can be found in Section 10 "Technical data" in the Operating Instructions.
4.1.1 Incoming acceptance
On receipt of the goods, check the following points:
• Are the packaging or contents damaged?
• Is anything missing from the delivery? Compare the scope of delivery with the information
you specified in the order.
4.1.2 Transportation and storage
Note the following points:
• Pack the device so that is protected against impact for storage and transportation. The
original packaging provides optimum protection.
• The permitted storage temperature range is –40 to 85 °C (–40 to 185 °F); it is possible to
store the device in the limit temperature ranges for a limited period (maximum 48 hours).
Endress+Hauser
Installation
31