Incoming acceptance and product identification
3.2.2
Scope of delivery
The scope of delivery of the device comprises:
• Temperature transmitter
• Wall or pipe mounting bracket, optional
• Dummy plugs
• Hard copy of multi-language Brief Operating Instructions
• Additional documentation for devices which are suitable for use in the hazardous area (0
1), such as Safety Instructions (XA), Control or Installation Drawings (ZD).
• Hard copy of Functional Safety Manual (if SIL mode option selected)
3.2.3
Certificates and approvals
CE mark
The product meets the requirements of the harmonized European standards. As such, it
complies with the legal specifications of the EC directives. The manufacturer confirms
successful testing of the product by affixing to it the CE-mark.
EAC mark
The product meets the legal requirements of the EEU guidelines. The manufacturer confirms
the successful testing of the product by affixing the EAC mark.
UL approval
UL recognized component (see www.ul.com/database, search for Keyword "E225237")
HART® protocol certification
• The temperature transmitter is registered by the HART® FieldComm Group. The device
meets the requirements of the HART Communication Protocol Specifications, Revision 7
(HCF 7.6).
• An overview of other approvals and certifications is provided in the Operating Instructions.
3.3
Transport and storage
Carefully remove all the packaging material and protective covers that are part of the
transported package.
Pack the device so that it is reliably protected against impact when it is stored (and
transported). The original packaging offers the best protection.
Storage temperature
32
Without display –40 to +100 °C (–40 to +212 °F)
With display –40 to +80 °C (–40 to +176 °F)
iTEMP TMT162
Endress+Hauser