Changing Of The Hinge Position - Pkm KG 288.4 A++ Bedienungsanleitung

WARNING! Switch off the appliance and
1.
pull the plug out of the socket before you change
the illuminate.
2. LED-data: 220~240V
3. Push with a finger on the centre of the illuminate-
cover.
4. Remove the cover with a small screwdriver. Be
very careful.
5. Change the illuminate and reinstall the cover.
Do not touch the LED illuminate with bare hands as sweat and other
contaminations do damage or destroy the illuminate.
The power cord must be replaced by a qualified

9. CHANGING OF THE HINGE POSITION

The change of the hinge position must be carried out by at least two persons;
otherwise you may hurt yourself or damage the appliance.
You need a soft foam underlay or an underlay made of a similar material as
you have to lay the appliance on its rear one time while working.
Replacing of the illuminate
NOTICE!
Replacing of the power cord
WARNING!
and authorized professional only.
CAUTION!
Tools required
Preparation required
46