3.3 Changing of the hinge position
WARNING!
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the hinge position must be carried out by at
least two persons; otherwise you may hurt yourself or damage the
appliance. Do not tilt the appliance more than 45
1. Unscrew the 2 screws (1+2) and remove the entire top hinge.
2. Lift the door upwards until you have removed it from the bottom hinge. Store
the door in a safe place so you will not damage it.
3. Unscrew the screws (3+4) of the bottom hinge and remove it.
4. Fix the former top hinge on the bottom with the 2 screws. Carry out the steps
described above in reverse order.
5. Check that the door is well-adjusted and closes properly before you finally tighten
the screws.
NOTICE! Adjust the door properly. The seal must close properly.
Switch off and unplug the appliance before changing the
0
.
45