Electrical Connection; Changing Of The Hinge Position - Pkm KS 120.4 A++EB Bedienungsanleitung

Do not use a socket board or a multi socket or an extension cord when using
220–240 V/50 Hz alternate current (AC).All electrical connections which may be
1. An electrical supply of 220-240V AC / 50 Hz is required.
2. Connect the appliance to a suitable and dedicated socket only.
3. For your personal safety, the appliance must be grounded. The appliance is
equipped with a 3-pole grounding plug. Use a suitable socket to minimize the
risk of an electric shock.
4. The appliance must not stand on the power cord.
5. If the power cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid any kind of hazard.
6. Check if the technical data of your energy supply meet the values on the
nameplate.
7. Do not modify the appliance.
8. Do not attempt to repair the appliance alone. Repairs carried out by
unauthorized persons can cause serious damage. Always contact the shop you
purchased the appliance at and use original spare parts only.
9. Your domestic circuit must be equipped with an automatic circuit breaker.
10. Do not use any electric appliances inside the food storage compartments of
your appliance unless they are recommended by the manufacturer of your
refrigerator.
11. Do not put any heat-radiating appliances onto your appliance.
12. Do not put a water-boiler or vases onto your appliance. The electrical
components of your appliance can be seriously damaged by water over-boiling
or spilled water.
You find the relevant information in the addendum on pg. 45f.
Downloaded from www.Manualslib.com

Electrical connection

damaged must be repaired by a qualified professional.
Installation (Look at addendum pg. 45f.)

Changing of the hinge position

WARNING! Unplug the appliance before you change the hinge position.
Carry out the change with at least 2 persons.
manuals search engine
WARNING!
Empty the appliance.
29