Changing Of The Hinge Position; Preparatory Measures - Pkm KS82.3A+ UB Bedienungsanleitung

5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is situated inside the appliance or at the back.

3.3 Changing of the hinge position

WARNING! Switch off and unplug the appliance before changing. RISK
OF ELECTRIC SHOCK!
WARNING! Unplug the appliance before you change the hinge
position. Empty the appliance. Carry out the change with at least 2
persons.
CAUTION! The change of the position must be carried out by at least
two persons; otherwise, you may hurt yourself or damage the appliance.
NOTICE! You should contact a qualified technician if you want to have the
door swing reserved. Only try to carry out the steps described below when
you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws of
the hinges. The seals must close properly.
NOTICE! Do not tilt appliance more than 45°.
➢ Empty the appliance.
➢ If possible, remove all door trays, glass shelves and drawers from the fridge
so that they cannot be damaged.
➢ It is necessary to tilt the appliance backward while removing the Doors.
Lean the appliance against a solid and immovable surface so it will not slip
while changing the hinge positions.
➢ Do not lay the unit flat as this can damage the cooling system.
➢ All parts removed must be saved for proper reinstallation of the doors.
➢ Always remove the door(s) carefully. Keep the door(s) in a safe place so
that they cannot be damaged.

PREPARATORY MEASURES:

33