Changing Of The Hinge Position - Pkm KS 130.4 A++ Bedienungsanleitung

Ventilation
Minimum distances required for proper ventilation:
A. Back ↔ wall
B. Right/left ↔ any piece of furniture/wall
B. Free space above
Door opening angle

3.2 Changing of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the hinge position must be carried out by
at least two persons; otherwise you may hurt yourself or damage the
appliance. Do not tilt the appliance more than 45
1. Remove the 2 covers and screws of the worktop und pull it forward.
2. Slightly tilt the appliance back and secure it in this position.
3. Remove the screws of the hinge and the bracket of the hinge axle.
4. Open the door slightly and pull it downwards from the hinge.
5. Unscrew the top hinge axle and install it on the opposite side. Put the door on
the axle. Close the door.
6. Tighten the bracket of the hinge axle with the screws on the opposite side.
3
Schematic drawing is valid for all models.
3
0
.
27
Min. 10 cm
Min. 30 cm
Min. 30 cm
0
Min. 160