Changing Of The Hinge Position - Pkm KS 82.3A+ UB Bedienungsanleitung

8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is inside the appliance or at the back.

3.2 Changing of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the hinge position must be carried out by at
least two persons; otherwise you may hurt yourself or damage the
appliance. Do not tilt the appliance more than 45
1. Remove the screws (1) and then the top metal-panel (6). Now remove the door.
Put the door on a soft surface to avoid scratches. A second person should assist
you.
2. Unscrew the top hinge axis (5) from the top panel. Now screw the axis to the left
side of the cover panel (6).
3. To remove the bottom hinge (2) remove the two screws (8).
4. Now unscrew the left front foot (4) and fix it on the opposite right side.
5. Move the complete bottom hinge (2) together with the other hinge axis (7) to the
opposite left side and fix it with the two screws (8). Also install the other front
foot.
6. Place the door carefully on the hinge axis (7) of the bottom hinge. Keep the door
properly adjusted. A second person should assist you.
7. Place the hinge axis (5) of the top metal-panel (6) into the corresponding device
of the door and fix the adjusted panel with the screws (1).
8. Finally check if the door is properly adjusted and can be properly closed.
0
.
37