Reset A Method - struers ProntoPress-10 Gebrauchsanweisung

Reset a Method

34
ProntoPress-10
Instruction Manual
If a method is not relevant any more, it should be reset.
The parameters will change to default values, which can easily be
changed to a new method later on.
The method name will change to: EMPTY METHOD, telling you,
that you can copy to or modify in this method without replacing
any valuable data.
Select the group with the mounting method you want to reset.
Select the mounting method you want to reset.
Group:GROUP NUMBER 2
1.METHOD 1
3.METHOD 3
F1:COPY F2.INSERT
D
If it is not an EMPTY METHOD:
e
Press ENTER
D
Press Esc to return to the above
Esc
display.
D
Press F3:RESET.
F3
D
Do you want to reset this method ?
Group: 2. GROUP NUMBER 2
Method: 3. METHOD 3
ENTER: YES
D
e
Press ENTER
SELECT METHOD
2.METHOD 2
4.EMPTY METHOD
F3:RESET
e
to see the method.
ESC: NO
e
to reset the method.