8 LaboForce-100
Resetting the configuration
Resetting the configuration will reset all configuration parameters to their default factory settings.
1.
Wählen Sie aus Main menu (Hauptmenü)Maintenance (Wartung) > Reset configuration
(Konfiguration zurückstellen).
2.
Switch LaboForce-100 off, then on again and reconfigure the settings.
8.3
The preparation process
8.3.1
Preparation modes
From the Main menu (Hauptmenü) you can select three different preparation modes:
The specimen holder methods and the single specimen methods are initially the same. When you
create a method in one of these screens, the same method is automatically created in the other
screen.
66
•
Reset configuration (Konfiguration zurückstellen)
Siehe auch
Resetting the configuration
•
Service information (Service-Information)
Tipp
Make a note of all customized settings before you reset the configuration.
•
Specimen holder methods (Methoden für Probenhalter)
Specimens are clamped in specimen holders and prepared.
•
Single specimen methods (Methoden für Einzelproben)
Specimens are prepared as single specimens.
•
Manual preparation (Manuelle Präparation)
Specimens are prepared manually.
►66.
LaboPol-30