Information On The Product; Declaration Of Conformity - EDELRID FLEX PRO Bedienungsanleitung

WARNING! Failure to follow these instructions
may endanger life!

INFORMATION ON THE PRODUCT

Manufacturer: EDELRID
Product designation: fall arrest harness to EN 361,
sit harness to EN 813, positioning harness to EN
358, full body harness to ANSI/ASSP Z359.11
Model: Flex Pro/Flex Pro Plus
Size
Maximum user load
YYYY MM: Year and month of manufacture
EN 813: 2008: Max. user weight, incl. equipment in kg
Lot number: GV xxx xxxx
Identification: (to be entered by the user him/herself
if appropriate)
0123: certification body monitoring the PPE pro-
duction
Warning notices and instructions must be read
and observed
Fall arrest harness to EN 361: Marking A and A/2
(A/2 + A/2 = A ): fall arrest attachment point
Material:
Polyamide = PA, Polyester = PES, Aluminium = ALU,
Steel = Steel

DECLARATION OF CONFORMITY

EDELRID GmbH & Co. KG herewith declares that the
article is in conformity with the applicable pertinent
requirements and regulations of the EU Regulation
2016/425. The original declaration of conformity
may be downloaded from the following website:
http://www.edelrid.com/...
Remarks
Instructions for use: CE XXXX: Notified body respon-
sible for issuing of the EU Type Approval Certificate
of the product.
Our products are manufactured with the utmost
care. However, should any of our products give
cause for a justified complaint, please advise us of
the lot number.
We reserve the right to make technical amendments.
ANSI additional information
- The Instructions for Use must be provided to the
user of this equipment.
- The Instructions for Use for each item of equipment
used in conjunction with this product must be fol-
lowed.
- Rescue plan: You must have a rescue plan and the
means to rapidly implement it in case of difficulties
encountered while using this equipment.
- WARNING: when using multiple items of equip-
ment, a dangerous situation can arise in which the
safety function of an item of equipment can be af-
fected by the safety function of another item of
equipment.
- WARNING: chemicals, heat, corrosion and ultravio-
let light can damage your harness. Contact Edelrid
if there is any doubt about the condition of this
product.
- Be vigilant when working near sources of electricity,
moving machinery or abrasive or sharp surfaces.
Appendix A – ANSI/ ASSP Z359.11
ANSI/ASSP Z359 Requirements for proper use and
maintenance of full body harnesses
Note: The following information from the ANSI/
ASSP Z359.11 standard is required to be includ-
ed in the instruction manual for the end user. The
manufacturer of this equipment may impose more
stringent restrictions on the use of the products they
manufacture; see the manufacturer's instructions.
1. It is essential that the users of this type of equip-
ment receive proper training and instruction in-