EDELRID FLEX PRO Bedienungsanleitung Seite 28

EN
Flex Pro and Flex Pro Plus
Fall arrest harness to EN 361, positioning har-
ness to EN 358;
Flex Pro Plus: sit harness to EN 813,
Flex Pro: full body harness to ANSI/ASSP Z359.11
INSTRUCTIONS FOR USAGE, SAFETY, LIFESPAN,
STORAGE AND CARE
This product is part of personal protective equipment
for protection (PPE) against falls from heights and
should be allocated to one individual.
These instructions for use contain important notes,
a control card and a proof of inspection (test book).
Before using this product, all documents must have
been read and their content understood. This docu-
ment must be provided to the user by the retailer in
the respective country's language and must be kept
with the equipment while it is in use.
INSTRUCTIONS FOR USE
These instructions must be carefully read and followed.
This product especially manufactured for working at
great heights or depths does not release users from
the risk borne personally. Work and sporting activities
carried out at great heights or depths are potentially
dangerous. Errors and carelessness can lead to seri-
ous injuries or even to death. Experience is required
in order to select the correct equipment. Equipment
may only be used by trained and experienced persons
or under instruction and supervision. Users must be
aware that poor physical and/or mental health can
jeopardise safety under normal conditions and in
emergencies. The manufacturer cannot be held liable
if the equipment has been abused or used incorrectly.
In all cases, the users or the persons responsible bear
the responsibility and the risk. When using this prod-
uct in the areas of rescuing and personal protective
equipment, we recommend that the relevant national
regulations be observed. Before using the equipment,
the user must ensure that, in the event of falling into
the PPE-system, the person caught can be rescued
immediately, safely and effectively. Motionless sus-
pension in a harness may cause severe injury and
even death (suspension trauma).
Personal protection equipment products may only
be used to belay people.
Product specific notes
Fig. 1a/b designations of relevant elements:
A Sternal fall arrest attachment point
B Dorsal fall arrest attachment point
C Adjustable shoulder straps/Easy Glider buckle
D Waist attachment point. This attachment point is
not designed for fall arrest purposes.
E Tripel Lock buckle
F Removable leg cushion
G Visual fall indicator
H Elastic keepers
I Individual labelling field
J Bag for RFID (chip)
K Labelling
L Lower front attachment point for fall arrest accord-
ing EN 361 (EN 353-1 usage) and work positioning
according EN 813 and EN 358.
M equipment attachment loops for up to 25 kg
N equipment attachment loop for four (Edelrid) tool
bags (Fig. 11)
Application to EN 813 (Fig. 10a):
Flex Pro Plus:
The product conforms to the requirements of
EN 813. Connection to the sit harness is made by
means of the ventral sit harness eye (L).