Intended Use - Scheppach THM850 Originalbetriebsanleitung

ATTENTION!
The device and packaging materials are not toys! Children must
not be allowed to play with plastic bags, film and small parts!
There is a risk of swallowing and suffocation!

4. Intended use

The surfacing and thicknessing plane is designed for the surfacing
and thicknessing of all types of whole pieces of square, rectangular or
chamfered converted timber.
The machine is to be used only for its prescribed purpose.
m WARNING!
The following work must not be carried out:
• Insert work (in other words any work which does not extend over the
full length of the workpiece)
• Recesses, tenons or cut-outs
• Planing highly warped timber in which there is inadequate contact
with the feed bench.
m The protective equipment on the appliance is strictly prohibited to be
disassembled, changed, used in conflict with the designation and it is
prohibited to attach any protective equipment of other manufacturers.
The bridge guard must not be removed during machining. The unused
part of the blade shaft must be covered.
Requirements for operating staff
The appliance may only be operated and maintained by persons famil-
iarised with it and informed about possible risks.
Never let children work with the appliance. Never let adults work with
the appliance unless they have been properly trained.
The operating staff must carefully read the Operating Instructions be-
fore using the appliance.
www.scheppach.com
GB | 49