Scheppach THM850 Originalbetriebsanleitung Seite 53

20 Check damaged parts
- Before further use of tool, it should be carefully checked to deter-
mine that it will operate properly and perform its intended function.
- Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions that may
affect its operation.
- A guard or other part that is damaged should be properly repaired
or replaced by an authorized service centre unless otherwise in-
dicated in this instruction manual.
- Have defective switches replaced by an authorized service centre.
- Do not use the tool if the switch does not turn it on and off.
21 WARNING!
- The use of any accessory or attachment other than one recom-
mended in this instruction manual may present a risk of personal
injury.
22 Have your tool repaired by a qualified person
- This electric tool complies with the relevant safety rules. Repairs
should only be carried out by qualified persons using original spare
parts, otherwise this may result in considerable danger to the user.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
SPECIAL SAFETY INSTRUCTIONS
• Do not use blunt knives. Risk of kick-back.
• The cutter block must be fully covered.
• Use a push stick to plane any short workpieces.
• Take additional safety precautions if you are planing any narrow work-
pieces. It may be necessary to use lateral pressure equipment and
springloaded covers to ensure that you can work in safety.
www.scheppach.com
GB | 53