Operation - GOK VSR 0523 Montage- Und Bedienungsanleitung

4.
open
4. Open the cylinder valve.
5. Press the start-up button of the excess flow valve.
6. Check the connections on the gas cylinder and on the emergency supply for leaks (spray
with a foaming agent according to EN 14291 (e.g. leak detector spray,
Part no. 02 601 00).
When the gas tank has been refilled, dismantle the emergency supply set in the
following sequence:
• close the cylinder valve,
• loosen and remove the connections of the emergency supply set,
• screw the sealing nut of the emergency supply connector on again tightly (Figure 2),
• check for leaks.

OPERATION

Use this product only when you have carefully read the assembly and operating
manual.
For your own safety, observe all the safety messages in this assembly and
operating manual.
Please also consider the safety of others.
The product can be damaged if the gas cylinder is moved!
Entrained liquid phase can cause the pressure to increase in the LPG system and damage
the product or the LPG system.
Do not move the gas cylinder while the system is in operation.
26 / 120
5.
Artikel-Nr. 05 239 50 l