Troubleshooting Table - hanseatic 65P90E1-E11L000 Gebrauchsanleitung

Page EN-28

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
■ Never try to repair a defective or suspected defective appliance yourself. You can
put your own and future users' lives in danger. Only authorised specialists are allo-
wed to carry out this repair work.
Problem
Built-in oven not working,
blank display.
Built-in oven cannot be
switched on.
Built-in oven cannot be
operated and the symbol
(20) is shown on the
display.
The cooking compart-
ment light is defective.
The external cooling fan
is not working; no air re-
leased from the air locks
and Cover is very hot.
External cooling fan
keeps running.
Possible solutions/tips
The power supply has been interrupted. Check the socket and the
fuse for the stove/built-in oven at the fuse box. If you have any con-
cerns, contact our Service Centre (see „Service" on page EN-29).
When the lock symbol
is activated and all functions are locked (see „Safety lock (child safety
lock)" on page EN-16).
If the clock is not set, the built-in oven cannot be switched on (see
„Setting the time" on page EN-13).
The timer is active (see page EN-28). Thus all functions are locked. To
reset the timer, press the button
Replace the defective bulb for the cooking compartment lighting (see
„Replacing the light bulb in the cooking compartment" on page EN-23).
Notice: Defective bulbs do not fall under our warranty.
The external cooling fan is defective.
CAUTION!
Risk of burns!
■ Open the built-in oven's door, switch off the appliance
and do not use it. Inform our customer service team (see
„Service" on page EN-29).
No error. The external cooling will run for a while and then shut off
automatically.
(15) is shown on the display, the child safety
(17) twice.