Herunterladen Inhalt Inhalt Diese Seite drucken

Installation And Connection; Moving And Unpacking; Installing The Built-In Oven - hanseatic 65P90E1-E11L000 Gebrauchsanleitung

Einbaubackofen
Vorschau ausblenden Andere Handbücher für 65P90E1-E11L000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Installation and connection

WARNING
Risk of injury!
■ The built-in oven is heavy and bulky.
Get another person to help with mo-
ving and installation.
■ Do not use the oven door and door
handle as a step or for lifting.
Fire hazard!
Improper handling of the built-in oven
may result in damage or cause a fi re.
Heat trapped inside the appliance may
shorten its service life.
■ Ensure suffi cient ventilation. Do not
cover the vents, for example with
oven gloves or cookbooks.
■ When installing the appliance, follow
the dimension specifi cations for ven-
tilation.
CAUTION
Risk of damage!
Improper handling of the appliance
may result in damage.
■ Do not use sharp objects to unpack
the appliance.

Moving and unpacking

• Move the appliance using a trolley or with
the help of a second person.
• Carefully unpack the device and remove
all packaging items, plastic profiles, adhe-
sive strips and foam padding from inside,
outside and from the back plate of the
device.
Installation and connection

Installing the built-in oven

The built-in oven is designed for installation in
standard kitchen units. It can be installed at
eye-level and underneath the worktop.
The following conditions must be observed:
– Do not install the built-in oven directly next
to a refrigerator or freezer. This will increase
its energy consumption unnecessarily due
to heat emission.
– The best place is next to the sink. You have
an additional work surface and dirty dishes
can be washed immediately.
– Before installation, check whether the appli-
ance dimensions are compatible with your
furniture dimensions.
– In terms of fire protection, the built-in oven
conforms to Type Y (EC 335-2-6). This type
of appliance may only be installed on one
side of taller kitchen cabinets, appliances
or walls.
– The installation recess may not have a rear
panel, at the most it may have an add-on
edge measuring no more than 50 mm.
– The built-in cabinet can be equipped with
either ledges/rails or an intermediate shelf
with ventilation cut-out.
Page EN-25

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis