Troubleshooting Table - hanseatic N5M90E2-E11G400 Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users' lives in danger. Only authorised specialists are allowed to
carry out this repair work.
Problem
Oven not working, blank
display.
Oven cannot be
switched on.
Oven cannot be oper-
ated and the symbol
(20) or the symbol
(21) is shown on the
display.
Oven lamp defective.
The external cooling fan
is not working; no air re-
leased from the air locks
and they are very hot.
External cooling fan
keeps running.
Possible solutions/tips
The power supply has been interrupted. Check the socket and the
fuse for cooker/oven at the fuse box. In case of doubt, connect our
Service Centre (see „Our Service Centre" on page GB-26).
When the lock symbol
is activated and all functions are locked (see „Child safety" on page
GB-13).
If the clock is not set, the oven cannot be switched on (see „Setting
the clock" on page GB-10).
The timer is active (see page GB-15). Thus all functions are locked. To
reset the timer, press the button
Replace the defective bulb for the oven lamp (see „Delivery" on page
GB-3). Notice: Defective bulbs do not fall under our warranty.
The external cooling fan is defective.
CAUTION!
Risk of burns!
In such an event, immediately open the oven door, switch
■
off the appliance, and stop using the cooker! Contact our
Service Centre (see „Our Service Centre" on page GB-26).
No defect. The external cooling will run for a while and then shut off
automatically.
Troubleshooting table
(15) is shown on the display, the child safety
(17) twice.
Page GB-25