Special Defrosting Information; Special Preparation Information For Yeast Dough; Safety Lock (Child Safety Lock) - hanseatic 65P90E1-E11L000 Gebrauchsanleitung

Page EN-16 Operation

Special defrosting information

WARNING
Health hazard!
Defrosting meat, poultry or fi sh in the
built-in oven can cause dangerous
micro-organisms (such as salmonella)
to multiply rapidly, therefore: This in-
creases the risk of food poisoning.
■ Do not defrost meat, poultry or fi sh in
the built-in oven.
■ Only use the defrosting function to
defrost vegetables, pre-cooked food,
etc.
■ Take the frozen food out of the free-
zer ahead of time and let it defrost
in the refrigerator. The fl uid from the
frozen food must be able to properly
drain, otherwise harmful microorga-
nisms can form.
Defrosting merely circulates unheated air wit-
hin the cooking compartment. This accelera-
tes the defrosting process. No heat is applied
during defrosting.
In order to make more room in the coo-
king compartment, you can remove the
baking tray guides and defrost the frozen food
container directly on the bottom of the oven
(see „Cleaning the baking tray guides" on
page EN-22).
Special preparation
information for yeast dough
If the baking dish does not fit in the cooking
compartment, you can remove the baking tray
guides to increase the cooking compartment
volume (see page EN-22).
1. Pre-heat the built-in oven to 50 °C.
2. Switch the built-in oven off when the tem-
perature has been reached.
3. Place the baking dish with the yeast
dough in the cooking compartment. You
can place the dish directly on the bottom
of the cooking compartment.
4. Close the oven door and leave the yeast
dough in the built-in oven for the desired
time without further heating.
NOTICE
Risk of damage!
Pent-up heat can damage the built-in
oven's enamel.
■ If you wish to place dishes directly on
the bottom of the cooking compart-
ment, the oven temperature must not
exceed 50 °C.

Safety lock (child safety lock)

If the safety lock is activated, the lock symbol
(15) lights up on the display. All buttons and
the rotary switch are non-operational.
The safety lock can also be activated
during operation.
Activating/deactivating the safety
lock
• To activate and deactivate the safety lock,
press and hold the buttons
(17) simultaneously for approx. 3 se-
conds.
A beep will sound and the lock symbol
(15) will appear on or disappear from the
display, respectively.
(16) and