Troubleshooting Table - hanseatic N5M90E2-E11G400 Gebrauchsanleitung

Page EN-28

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
■ Never try to repair the appliance yourself. You can put your own and future users'
lives in danger. Only authorised specialists are allowed to carry out this repair work.
Problem
Oven not working, blank
display.
Oven cannot be switched
on.
Oven cannot be operat-
ed and the symbol (20)
or the symbol (21) is
shown on the display.
The cooking compart-
ment light is defective.
The external cooling fan
is not working; no air re-
leased from the air locks
and they are very hot.
External cooling fan
keeps running.
Possible solutions/tips
The power supply has been interrupted. Check the socket and the
fuse for cooker/oven at the fuse box. If you have any concerns, con-
tact our Service Centre (see "Service" on page EN-29).
When the lock symbol
ty is activated and all functions are locked (see "Child safety" on
page EN-17).
If the clock is not set, the oven cannot be switched on (see "Setting
the clock" on page EN-13).
The timer is active (see page EN-18). Thus all functions are locked. To
reset the timer, press the button
Replace the defective bulb for the cooking compartment lighting (see
"Replacing the cooking compartment light bulb" on page EN-23). No-
tice: Defective bulbs do not fall under our warranty.
The external cooling fan is defective.
CAUTION!
Risk of burns!
■ In such an event, immediately open the oven door, switch
off the appliance, and stop using the cooker! Contact our
Service Centre.
No defect. The external cooling will run for a while and then shut off
automatically.
(15) is shown on the display, the child safe-
(17) twice.