Heating The Solid Plates And Oven Empty; Troubleshooting Table - hanseatic HMO366BKB Gebrauchsanleitung

Heating the solid plates and
oven empty
Before using the appliance the first time, it
must be heated up empty in order to remove
production-related residues from the heating
elements.
During this process, make sure there is
enough ventilation, for example, by opening
a window. It is normal for a light odour and
smoke to develop that will then disappear
shortly thereafter.

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
■ Never attempt to repair the appliance yourself. You can put your own and future
users' lives in danger. Only authorised specialists are allowed to carry out this re-
pair work.
Problem
Appliance does not heat up. The appliance is not
Setting up, connecting and starting up the appliance
Possible causes
connected to the mains.
The appliance is not drawing
any power.
– Set the solid plates to the highest level and
let them heat up for approx. 3 minutes.
See Chapter "Using and caring for the hob"
on pageEN-10 for instructions.
– Let the oven heat up for 15 minutes with
top and bottom heat at 220 °C.
See Chapter "Using and cleaning the oven"
on pageEN-12 for instructions.
Solutions / tips
Connect the mains plug to a
properly installed socket.
Check the socket or the fuse.
Seite EN-19