The Sqlab Active Saddle Technology (Model-Dependent); Active Movement Setting - SQlab M-D LINE Bedienungsanleitung

Bundesinnungsverband für das Deutsche Zweiradmechaniker-Handwerk (BIV), TÜV Rheinland, velotech.de, Verbund Service und
Fahrrad (VSF), Zedler-Institut as well as the Zweirad-Industrie-Verband (ZIV) with restrictions, if the offset to the rear to the series /
original application area is not greater than 20 mm. In this case, a change in load distribution outside the intended adjustment range
may lead to critical steering characteristics. The length of the saddle stays on the saddle frame and the saddle shape also play a role
here.
On our website www.sq-lab.com/service/downloads/ you will find a document called eBike Ready in the service area under
Downloads. There you will find detailed information on component replacement on Pedelec45, as well as the guidelines for component
replacement from the Zweirad-Industrie-Verband (ZIV), Verbund Service und Fahrrad (VSF), the Zedler Institute and the
Bundesinnungsverband Fahrrad (BIV).

The SQlab Active Saddle Technology (model-dependent)

Depending on the model, the SQlab ERGOLUX ® saddles are equipped with a replaceable elastomer , 2 or 4 damping sticks or an active
switch.
Structure of the Saddle
The saddle allows by its design a movement of the pelvis in a horizontal plane. The performance of the so-called pelvic swing is thus
ensured - as in natural walking.

Active Movement Setting

To achieve an even more effective, comfortable tilting of the saddle, the hardness of the active element can be adjusted on the active
models.
Elastomer Configuration SQlab M-D Line active
SQlab 610 M-D Line active SQlab 610 M-D Line active
with inserted elastomer with elastomer removed
The extent of the tilting movement can be adjusted in the SQlab 610 M-D Line active 2.1 by replacing the elastomer. Included with the
saddle are 3 elastomers, which differ in hardness and corresponding colors and are selected according to the rider's weight.