SQlab M-D LINE Bedienungsanleitung Seite 36

The elastomers are not screwed or glued, but only clamped and can be pulled out backwards by hand. To facilitate changing the
elastomers, they can be moistened.
Adjustment of the Active Movement on the SQlab 602 M-D Line active (2.0)
In the SQlab 602 M-D Line active model, two sticks can be removed from the shock absorber to adjust the Active movement.
Whether to ride with or without sticks depends on personal feeling, seating position and body weight.
The configuration of the sticks should always be symmetrical, i.e. left and right should always be equally equipped. Without sticks, the
damper becomes softer - in particular, the rotational movement around the longitudinal axis becomes stronger.
Pick up the sticks well, if you want to ride the saddle at a later date but again with the damping sticks.
Adjusting the Active Movement on the SQlab 621 M-D Line active (2.0)
In the SQlab 621 M-D Line active model, up to four sticks can be removed from the damper to adjust the active movement.