Assembly; Saddle Height - SQlab M-D LINE Bedienungsanleitung

Warning
Damage to the saddle rail due to clamping with burrs.
Risk of accident due to sudden and unmediated breakage of the saddle rail during use.
• Only mount your SQlab M-D Line saddle in seat posts whose clamping jaws are cleanly deburred.

Assembly

Warning
Incorrectly mounted components
Improperly mounted components can cause a crash.
•
You must read and understand the instructions and notes before you start assembly.
•
If you have any questions about mounting these components, contact your SQlab dealer or have the saddle mounted by an
experienced bicycle mechanic.
Note
For the equipment of an eMTB, eBikes and pedelecs, country-specific standards, rules and regulations must be observed.
•
In Germany, observe the "Guide for Modifications to Pedelecs" of the Zweirad-Industrie-Verband e.V. (http://www.ziv-
zweirad.de) in cooperation with Verbund Service und Fahrrad g.e.V. (www.vsf.de) and Zedler-Institut für Fahrradtechnik und
-Sicherheit GmbH (www.zedler.de).
•
SQlab saddles are not approved across the board for fast pedelecs (S-pedelecs, up to 45 km/h). Please observe the country-
specific requirements. In Germany, the "Guidelines for component replacement on fast e-bikes/pedelecs with pedal
assistance up to 45 km/h" must be observed in particular.

Saddle Height

Information on the correct adjustment of the saddle height can be found in the manual of your bike and in a variety of books and guides
on the subject of bicycle ergonomics. Your SQlab dealer will certainly also be happy to help you.
✓ OK
✓ OK
❌ NOT OK
❌ NOT OK