Wear And Storage; Manufacturer And Distribution - SQlab M-D LINE Bedienungsanleitung

Note
This regulation is only valid in European countries. Ask your SQlab dealer about any deviating regulations in your country.
The following specialist dealer warranty is in addition to the statutory liability for material defects of your contractual partner and does
not affect it.
In addition to the statutory liability for material defects, SQlab GmbH extends the manufacturer's warranty from 24 to 36 months for
products purchased from specialist dealers in Germany.
In the event of a defect occurring or a warranty inquiry, your SQlab specialist dealer is the contact.
The following end customer warranty is in addition to the statutory liability for material defects of your contract partner and does not
affect it.
For irreparable damage to your SQlab product caused by a fall, SQlab GmbH offers you a discount of 50% up to 10 years after the date
of purchase when buying a new SQlab replacement product.
If you want to take advantage of the Crash Replacement, send us your defective product to the following address:
SQlab GmbH
Crash Replacement
Postweg 4
D-82024 Taufkirchen
The originally purchased product automatically becomes the property of SQlab GmbH. SQlab will contact you after thorough examination
regarding a suitable replacement product.
Claims from the end customer warranty exist only if:
•
The SQlab product has been registered in the SQlab Crash Replacement Program (can be found on our website www.sq-lab.com
in the service area under Crash Replacement).
•
The purchase can be proven by receipt.
•
No modifications have been made to the product.
•
The intended use has been observed.
•
The defect of the saddle is not due to improper assembly or lack of maintenance.
•
Excluded are damages due to wear and tear
•
The supplementary end customer warranty is only valid in Germany.
Further claims of the end customer against SQlab GmbH from this warranty do not exist. In the event of a defect occurring or a warranty
inquiry, SQlab GmbH is the contact person.

Wear and Storage

Bicycles and their components are subject to function-related, mostly use-dependent wear, such as abrasion on tires, grips and brake
pads. Environment-related wear occurs when stored under aggressive environmental conditions, such as sunlight and the influence of
rain, wind and sand. Wear and tear is not covered by the warranty.
Caution
Incorrect storage of the SQlab saddle when mounted or remounted.
Premature wear due to sunlight, temperature or humidity.
•
Avoid direct sunlight on the saddle.
•
Store the saddle at temperatures between -10° and 40° and humidity below 60%.

Manufacturer and Distribution

SQlab GmbH, Postweg 4, 82024 Taufkirchen, Germany