Abilica Premium TopRower 2.0 Bedienungsanleitung Seite 15

BUNGEE CORD ADJUSTMENT
Over time, about 250,000 strokes on
HANDLEBAR(3), your BUNGEE CORD(38) may
stretch.
Follow the following process to adjust:
1. Position the MAIN FRAME
ASSEMBLY(1) as shown in the illustration.
Remove the MAIN FRAME CAP(68) from
the MAIN FRAME(1). Slid out the
BOTTOM COVER(70) from the MAIN
FRAME(1).
2. Position the MAIN FRAME ASSEMBLY(1)
as shown in the below illustration.
Unhook the LEFT BUNGEE CORD
HOOK(12L) from the MAIN FRAME(1).
Make a mark on the BUNGEE CORD(38)
to move the hook forward 2 inches. Refer to View 1 to View 3 to untie the BUNGEE CORD(38) from the LEFT
BUNGEE CORD HOOK(12L), and move the hook forward 2 inches. Refer to View 4 to View 6 to retie the BUNGEE
CORD(38) to the LEFT BUNGEE CORD HOOK(12L). Hook the LEFT BUNGEE CORD HOOK(12L) back into the MAIN
FRAME(1) and push the hook to the left side to touch the inner wall of the MAIN FRAME(1). CAUTION: Always use
two hands with a secure grip when re-attaching the BUNGEE CORD HOOKS(12L & 12R).
Unhook the RIGHT BUNGEE CORD HOOK(12R) from the MAIN FRAME(1). Do the same as above to adjust the
BUNGEE CORD(38) on the right side.
3. Position the MAIN FRAME ASSEMBL Y(1) as shown in the
illustration. Slid the BOTTOM COVER(70) back into
the MAIN FRAME(1).Press the MAIN FRAME CAP(68)
into the FRAME(1).
14