11. Operation
a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
After connection to the mains, the effect light will perform a reset. Only after this process is completed will
the device be ready.
• The operating modes are set in the menu via the display and the buttons MENU (1), DOWN (2), UP (3) and
ENTER (4).
• Press the MENU (1) button to select the individual menu items.
• Push the button ENTER (4).
• Change the values to be set or options with the DOWN (2) or UP (3) buttons.
• Confirm the selection with the ENTER (4) button.
• To go back one level in the menu without changes, push the MENU (1) button once.
Menu Overview
For a more detailed explanation of the individual menu items from the table, see the following items of these
instructions.
Menu Item
Option
Addr
1-512
ChNd
11Ch
39Ch
SLNd
NASt
SL 1
SL 2
Shnd
Sh 0 - Sh 15
Auto
oFF
on
SoUn
oFF
on
SenS
0-100
PInt
no
YeS
Function
Setting the DMX starting address
11-channel DMX operation
39-channel DMX operation
Device is in master mode
Device is in slave mode 1 (normal)
Device is in slave mode 2 (inverted)
16 different demo shows
Automatic mode deactivated
Automatic mode activated
Sound-to-light mode deactivated
Sound-to-light mode activated
Setting of the music sensitivity for sound-to-light operation
PAN-movement not inverted
PAN-movement inverted
31