SPORTSTECH sBike Lite Benutzerhandbuch Seite 33

3.3.2 Adjusting the horizontal saddle position
The saddle should be adjusted horizontally so that your back angle is comfortable
and your arms are slightly bent.
• Loosen the knob at the bottom of the saddle holder: To do this, turn counterclockwise.
• Move the saddle horizontally on the saddle holder. Tighten the knob again.
3.3.3 Adjusting multi-position handle vertically
Let the front tube protrude from the frame at most so far that the 'MAX'
marking is just visible.
• Securely grasp the multi-position handle from the front.
• Turn knob ('V') on main frame slightly anti-clockwise. Pull out locking pin.
• Lift the multi-position handle to the desired height: The front bar is not
infinitely adjustable: make sure that the pin of the knob engages in one of
the holes in the front bar.
• Engage knob ('V') and tighten.
3.3.4 Adjusting multi-position handle horizontally
• Slightly loosen the knob ('H') at the bottom of the multi-position handle.
• Push the multi-position handle on the front tube ('12') backwards or
forwards.
• Tighten knob ('H').
3.3.5 Adjusting the pedal straps (option 1)
If you want to use the pedal side without the click system, adjust the straps so that:
- on the one hand, they provide a secure hold,
- but on the other hand allow safe descent; without danger of getting stuck.
3.3.6 Adjusting the pedal click system (option 2)
WARNING! Risk of injury due to improper strain if the click system is incorrectly adjusted!
If you want to use the pedal side with click system, follow the instructions of the manufacturer of the click
system and the manufacturer of the shoes.
EN DE
H
V
33