Oled Display; Control Keys - Cameo STUDIO PAR TW Bedienungsanleitung

3 FUSE
for 5 x 20 mm fuses. IMPORTANT: Replace the fuse only with a fuse of the same type and value.
In the event of repeated fuse failure, please contact an authorised service centre.
4 DMX IN
Male 3-pin XLR socket for connection to a DMX control device (e.g. DMX console).
5 DMX OUT
Female 3-pin XLR socket for sending the DMX control signal.
6 IDMX STICK
Connection for the optional iDMX stick for W-DMX™ connection
(plug in the iDMX stick with the antenna facing upwards).
7

OLED DISPLAY

The OLED display shows the currently activated mode (main display), the menu items in the menu
and the numerical value or operational status in certain menu items. If there is no input for ap-
prox. 30 seconds, the display automatically returns to the main display. Note regarding the main
display in operating modes with external control: As soon as the control signal is interrupted, the
characters in the display begin to flash. When there is a control signal again, the flashing stops.
Briefly pressing the
8

CONTROL KEYS

MENU – Press MENU to access the main menu. Press again or repeatedly to return to the main
display. Pressing MENU without confirming a value or status change with ENTER restores the
previously confirmed value or status.
ENTER – press ENTER to access the menu levels, to make value changes, and to access the
submenus. Confirm value or status changes by pressing ENTER.
and – Select individual menu items in the main menu (DMX address, DMX mode etc.) and
in the submenus. Allows you to change the value of a menu option, such as the DMX address, as
desired.
9 SAFETY
Securing lug for attaching the spotlight.
12
button when in the main display rotates the display by 180°.