Oled Display - Cameo F2 FC IP Bedienungsanleitung

3 DMX IN
Male 5-pin XLR socket for connection to a DMX control device (e.g. DMX console).
4 DMX OUT
Female 5-pin XLR socket for sending the DMX control signal.
5 PRESSURE EQUALISATION ELEMENT
Pressure equalisation element to prevent condensation inside the housing. In order to ensure its
proper function, the element must be protected from contamination.

OLED DISPLAY

6
Displays currently active mode and the menu items in the Edit menu.
7 DIM/MENU
Rotary-push encoder for the adjustment and control of the spotlight.
DIM - In the standalone operating modes CCT, HSI, Direct LED, Gel, User Color and Play Loop, the
encoder has the function of the master dimmer (turn encoder).
ENTER - 1. Press ENTER to access the menu level for selecting the operating mode. 2. You move
down one level in the menu structure. 3. Press ENTER to confirm a value change, such as chang-
ing the DMX address.
SELECT - Turn the encoder to select the menu items on the menu level and change a value in a
menu item (e.g. DMX address).
8 The function of the middle turn-push encoder (turn and push) is shown in the corresponding
menu item in the centre of the display (line centre = turn, line bottom = push).
9 ESC - If the press function of the right-hand rotary-push encoder is not explicitly shown at the
bottom right of the display, pressing the encoder has the function of moving up one level in the
menu structure.
10 ZOOM
On either side of the cabinet is a calibration control to manually adjust the beam angle. The two
controls are mechanically linked and are directly opposite each other on the housing. Turn the
calibration control to adjust the beam angle of the spotlight continuously from 40° to 15°. A rack
and pinion system moves the zoom tube with the Fresnel lens in and out of the housing. The
further the zoom tube protrudes from the housing, the smaller the beam angle. A stop mechanism
prevents the tube from becoming detached from the housing.
12