Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Stihl HSA 100.0 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für HSA 100.0:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

19 Specifications

Fault
LEDs on the
battery
when switched
on.
1 LED emits
red light.
3 LEDs flash
red.
3 LEDs light
up red.
4 LEDs fla‐
shing red.
Hedge trimmer
3 LEDs light
cuts out during
up red.
operation.
Hedge trimmer's
running time is
too short.
STIHL connected
app is unable to
find the battery
with
.
18.2
Product Support and Assis‐
tance on Use
Product support and assistance on use are avail‐
able from STIHL servicing dealers.
For contacts and other information, please visit
https://support.stihl.com or www.stihl.com.
0458-020-9601-A
Cause
The battery is too
warm or too cold.
There is a malfunction
in the hedge trimmer.
The cutting blades do
not run freely.
Hedge trimmer is too
hot.
There is a fault in the
battery.
No electrical contact
between the hedge
trimmer and battery.
Hedge trimmer or bat‐
tery is damp.
Hedge trimmer is too
hot.
There is an electrical
fault.
The battery is not fully
charged.
The battery life has
been exceeded.
®
Bluetooth
radio inter‐
face on the battery or
mobile device is deac‐
tivated.
Distance between bat‐
tery and mobile
device is too long.
19 Specifications
19.1
– Permitted batteries:
– STIHL AP
– STIHL AR
Remedy
► Remove the battery.
► Allow the battery to cool down or warm
up.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
► Switch on the hedge trimmer.
► If 3 LEDs continue to flash red: Do not
use your hedge trimmer and contact your
STIHL servicing dealer for assistance.
► Spray both sides of cutting blades with
STIHL resin solvent.
► If 3 LEDs continue to flash red: Do not
use your hedge trimmer and contact your
STIHL servicing dealer for assistance.
► Remove the battery.
► Allow the hedge trimmer to cool down.
► Remove battery and reinsert it.
► Switch on the hedge trimmer.
► If 4 LEDs continue to flash red: Do not
use the battery; contact a STIHL authori‐
zed dealer.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
► Allow hedge trimmer or battery to dry.
► Remove the battery.
► Allow the hedge trimmer to cool down.
► Remove battery and reinsert it.
► Switch on the hedge trimmer.
► Recharge the battery fully as described in
the User Manual for the STIHL AL 101,
301, 301-4, 500 chargers.
► Replace battery.
► Activate Bluetooth
®
battery or mobile device.
► Reduce distance,
► If the battery still cannot be found with
the STIHL connected app: Contact a
STIHL authorized dealer for assistance.
STIHL HSA 100.0 hedge trim‐
mers
English
radio interface on the
19.1.
33

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis