Additional Safety Instructions For All Applications; Kickback And Corresponding Precautions - Parkside PMNF 1350 C3 Originalbetriebsanleitung

GB IE NI
for cracks, wear or strong abra-
sion and wire brushes for loose
or broken wires before using
them. If the electric tool or the
attachment tool falls off, check
whether it is damaged or, use
an undamaged attachment tool.
If you have checked the attach-
ment tool and attached it, keep
yourself and any nearby persons
beyond the level of the rotating
attachment tool and allow the de-
vice to run for 1 min. at the high-
est rotational speed. Damaged tools
usually break during this test period.
Wear personal safety equip-
i)
ment. Depending on the appli-
cation, use full face shields, eye
protection or safety goggles. In
so far as it is appropriate, wear
dust masks, ear protection,
gloves or special aprons which
keep small grinding and materi-
al particles away from you. Eyes
should be protected from the foreign
matter which can be caused to fly du-
ring the various applications. Dust or
breathing masks should filter the dust
that is created during operation. If you
are exposed to loud noise for a long
time, you may suffer hearing loss.
Ensure that other people are at
j)
a safe distance to your working
area. Anyone who enters the wor-
king area should wear personal
protective equipment. Broken bits from
the piece being worked or broken attach-
ment tools can fly away and cause injuries
even beyond the direct working area.
Hold the electric tool only by the
k)
insulated gripping surfaces when
performing work in which the
cutting tool may come into contact
1 0
with hidden wiring or its own
cord. Contact with a live wire can also
cause a charge in metal parts of the
device and result in an electric
Keep the cord away from the ro-
l)
tating attachment tool. If you lose
control of the device, the power cord
can become separated or caught and
your hand or arm may be pulled into
the rotating attachment
Never put the electric tool down
m)
before the attachment tool has
come to a full stop. The rotating at-
tachment tool can come into contact with
the surface upon which it is set, whereby
you could lose control of the electric
Never allow the electric tool to
n)
run while you are carrying it.
Your clothing may accidentally come
into contact with the rotating attachment
tool and get caught and the attachment
tool could drill into your
Clean the ventilation slots of
o)
your electric tool routinely. The
motor air pulls dust into the housing
and, should too much metallic dust coll-
ect, could cause electrical
Never use the electric tool near
p)
flammable material. Sparks could
ignite this material.
Do not use attachment tools
q)
which require liquid coolant.
Using water or another liquid coolant
could lead to electrical shock.
Additional safety instructions
for all applications
Kickback and corresponding
precautions
Kickback is the sudden reaction from a
chopping or blocked grinder attachment
shock.
tool.
tool.
body.
hazards.