Safety Instructions For All Types Of Use - Parkside PSSP 2 A1 Montage-, Bedienungs- Und Sicherheitshinweise

Correct angle: Hold the grinder at an angle of approx . 10 to 15º .
Correct pressure: Apply light, steady pressure .
Move the angle grinder back and forth steadily .
Turn off your hand-held angle grinder and allow it to stop rotating before
setting it down on the ground or your workbench .
˜ Safety instructions for all types of use
Safety instructions for grinding
Do not use any equipment not expressly intended for use with and
recommended by the manufacturer . The ability to successfully mount
equipment to your power tool guarantees safe use in no way .
The maximum speed of the attachment must be at least as high as that of
the power tool . Running attachments at speeds that exceed their maximum
rated speed may cause them to break, release from the power tool and
cause injury .
The exterior diameter and thickness of the attachment must correspond to
the size requirements of your power tool . Incorrectly measured attachments
cannot be sufficiently shielded or controlled .
8 GB