Scope Of Delivery; Proper Use; Safety Instructions; General Power Tool Safety Warnings - Parkside PMTS 210 A1 Originalbetriebsanleitung

4. Scope of delivery

• Saw blade guard (4)
• Push stick (14)
• Parallel stop (7)
• Transverse stop (2)
• Table width extension (22)
• End piece of table width extension (24) 2x
• Screw for end piece of table width extension (25)
2x M3x8 self-tapping
• Ring spanner 19/10 mm (21)
• Ring spanner 7/8 mm (20)
• Bracket for workbench mounting (42) 2x
• Screw M3x8 self-tapping (43) 2x
• Washers d 4mm (44) 2x
• Wooden screw for workbench mounting (45) 2x
• Operating manual

5. Proper use

The circular table saw is used for the longitudinal and trans-
verse cutting (only with the transverse stop) of all types of tim-
bers and plastic, in accordance with the machine size. It is not
permitted to cut any type of round timber.
The machine may only be used in the intended manner. Any
use beyond this is improper. The user/operator, not the manu-
facturer, is responsible for damages or injuries of any type re-
sulting from this.
Only suitable saw blades (HM or CV saw blades) may be
used for the machine. The use of HSS saw blades and any type
of cutting wheels is prohibited.
An element of the proper intended use is also the observance
of the safety instructions, as well as the assembly instructions
and operating information in the operating manual.
Persons who operate and maintain the machine must be fa-
miliar with the manual and must be informed about potential
dangers. In addition, the applicable accident prevention regu-
lations must be strictly observed.
Other general occupational health and safety-related rules and
regulations must be observed.
m ATTENTION
When using equipment, several safety warnings must be ob-
served to prevent injuries and damage. For this reason, please
carefully read this operating manual / safety instructions. Keep
them in a safe place so that the information is available at all
times. If you hand the device over to another person, please
hand over this operating manual / safety instructions as well.
We accept no liability for accidents or damage that occur due
to a failure to observe this manual and the safety instructions.
The liability of the manufacturer and resulting damages are ex-
cluded in the event of modifications of the machine.
Despite use as intended, specific risk factors cannot be entirely
eliminated. Due to the design and layout of the machine, the
following risks remain:
4 GB/IE
• Contact with the saw blade in the exposed sawing area.
• Reaching into the running saw blade (cutting injury)
• Kick-back of workpieces and workpiece parts
• Saw blade breakage
• Ejection of faulty carbide parts of the saw blade
• Hearing damage when the necessary hearing protection is
not used.
• Harmful emissions of wood dusts during use in enclosed areas.
Please note that our equipment was not designed with the inten-
tion of use for commercial or industrial purposes. We assume
no guarantee if the device is used in commercial or industrial
applications, or for equivalent work.

6. Safety instructions

General power tool safety warnings

m WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool.
Failure to follow all instructions listed below may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.

1) Work area safety

a) Keep your work area clean and well-lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed surfaces, such
as pipes, heaters, ovens and refrigerators. There
is an increased risk of electric shock if your body is earthed
or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of elec-
tric shock.