General Description; Extent Of The Delivery; Mounting Material; Overview - Parkside PTK 2000 C3 Originalbetriebsanleitung

GB MT
• Touching the saw blade in the area of the saw which is not co-
vered;
• Reaching into the running saw blade (cuts)
• Kickback of workpieces and workpiece parts.
• Saw blade breaks.
• Ejection of faulty hard metal parts of the saw blade.
• Hearing damage if the necessary hearing protection is not used.
• Emissions of wood dust which are harmful to the health when
used in closed rooms.
Please note that the use of our devices in accordance with the desi-
gnated purpose does not include commercial, handicraft or industrial
applications. We assume no warranty if the device is used in commer-
cial, handicraft or industrial businesses or for equivalent purposes.

General description

Extent of the delivery

Carefully unpack the appliance and check that it is complete:
- Saw table with pre-assembled
carbide-tipped saw blade with 24 teeth
carbide-tipped saw blade with 48 teeth
(additionally enclosed)
- Blade guard
- Riving knife with laser
- Batteries 1.5V AAA (2x)
- Parallel stop
- Stop rail
- Transverse stop
- Table width extender (2x)
- Table length extender
- Push stick
- Legs (4x)
- Central struts, short (2x)
- Central struts, long (2x)
- Rubber feet (4x)
- Stand brackets (2x)
- Table supports, short (4x)
- Table supports, long (2x)
- Instruction for use

Mounting Material

- Bag A for base frame, centre struts and stand brackets:
Round head bolt M6 x 12 with spring washer, washer and
nut (a), 24 pieces
- Bag B for table length/width extension and collection bag:
Hexagonal bolt with mounted washer/spring washer (b),
12 pieces;
Hexagonal bolt with spring washer,
2x washer and nut (c), 6 pieces;
Phillips screw with self-locking nut (d), 4 pieces
Tools
- Hexagon socket wrench HX 6
- Ring spanner AF 10/22
- Open-ended spanner AF 8/10
34
Additional tools required
- Phillips screwdriver
The illustrations are on the fold-out pages.

Overview

1 Saw table
1
2 Saw blade guard
3 Riving knife (not visible)
4 Saw blade (not visible)
5 Table insert
6 Parallel stop
7 Table width extender
8 Cam lever
9 Locking handle
10 Scale
11 Handwheel
12 Crank handle
13 Base frame
14 On/off switch
15 Collection bag for wood residues
16 Guide rail
17 Table length extender
18 Suction adapter
2
19 Push stick
20 Legs (4x)
4
21 Central struts, short (2x)
22 Central struts, long (2x)
23 Rubber feet (4x)
24 Stand brackets (2x)
5
25 Attachment points
26 Table brackets, short
10
27 Table supports, long
16
28 Countersunk screws of the table insert
17
29 Fixing screws of the riving knife
18
30 Slot in the riving knife
19
31 Knurled nut with screw
26
32 Cam lever
33 Groove
34 Knurled screw
35 Laser
31
36 Laser switch
37 Screw for battery compartment
32
29
38 Battery cover
37
39 Stop rail