The Display; Audible Signals - IEM Mobil-O-Graph Gebrauchsanweisung

Product description

The display

The LCD display is located on the front casing of the blood pressure monitor (see Fig. 1). It displays useful
information for the doctor and the patient regarding measurement data, blood pressure monitor settings and
measurement errors.

Audible signals

The audible signals used consist of individual or multiple burst sequences.
The following burst sequences are emitted:
Tone burst
1 tone burst
3 tone bursts
Continuous tone bursts
Combined tone bursts
24
Heard when
Switching on and off

Starting and ending measurement (except during the night-time

interval)
Removing the interface cable, ending IR communications,

establishing and ending Bluetooth communications
Measurement errors

System error (e.g. measurement terminated)

Serious system error (e.g. the cuff pressure is greater than 15 mmHg

for more than 10 seconds outside the measurement)
When manually clearing the readings, 1 tone burst is emitted first and

2 seconds later 5 tone bursts