Transmission Error; Checklist - IEM Mobil-O-Graph Gebrauchsanweisung

Troubleshooting

5.2 Transmission error

To avoid an error during data transmission, the blood pressure monitor includes a check of the data sent. If an
error has occurred, E004 will appear on the display.

5.3 Checklist

Please go through the following checklist if you have encountered errors when handling the Mobil-O-

Graph ® . Many errors have simple causes.
Check that all cables are firmly connected and/or that the infrared interface is correctly aligned with the

device.
Check if the blood pressure monitor, computer and printer are switched on (depending on the version you

have received).
Check that the connection cable is connected to the correct serial interface (COM1 to COM4).

Check that the power packs are sufficiently charged.

Note
Some errors are combined with a continuous alarm for safety reasons. The continuous alarm can be ended
by pressing any button. If there is residual pressure inside the cuff, open the cuff immediately.
44