Specifying The Desired Measurement Log - IEM Mobil-O-Graph Gebrauchsanweisung

Specifying the desired measurement log

You have the option, using the HMS CS, to adjust the following settings for the measurement log:
Beginning of 4 different daily intervals

Number of measurements per hour in the 4 daily intervals

Enable/disable the acoustic signals for the daily intervals

Enable/disable the optional PWA

Choose between 24-hour ABPM and in-clinic monitoring

Turn the display on/off.

As soon as you have conducted a measurement, the log can only be changed once you have completely deleted
all data.
You can set the log manually by pressing and holding the day/night button while simultaneously pressing the
event button. Use the start/stop button to change the log and confirm with the event button.
Note:
A Bluetooth interface is required for in-clinic monitoring. This can be obtained from your specialist supplier.
Setting the logs via software
To set the logs using software please refer to the HMS CS instructions for use for the respective
piece of patient data management software.
Product description
EN
29