IEM Mobil-O-Graph Gebrauchsanweisung Seite 140

Appendix
Troubleshooting
In the event of measurement or system errors, an error code will appear on the display of the Mobil-O-Graph
a few seconds. The following support instructions will help you understand how to deal with each error code:
Error code
ERR 1
ERR 2
ERR 3
ERR 5
ERR 6
ERR 7
ERR 8
ERR 9
ERR 10
66
Measures
Keep your arm still during measurement. If the error occurs repeatedly, put the arm
cuff on again.
Keep your arm still during measurement. If the error occurs repeatedly, check the
positioning of the arm cuff and check that the cuff tube is firmly connected to the
Mobil-O-Graph ® .
Keep your arm still during measurement. If this error persists, please contact your
doctor.
The batteries of the Mobil-O-Graph
Check whether the cuff tube is kinked. If the error persists, please contact your
doctor.
Measurement storage is full. Please contact your doctor.
The measurement was terminated by pressing a button. Repeat the measurement.
Press the START button.
Please contact your doctor.
If the error persists, please contact your doctor.
® are empty. Please contact your doctor.
® for