Measuring Frequency Range / Cut-Off Frequency Fco; Synchronization - HBM ME50S6 Bedienungsanleitung

6.6 Measuring Frequency Range / Cut‐off Frequency f
The Butterworth low pass of the amplifier has been set to 0...250 Hz (-1 dB) by
the manufacturer. It can be readjusted by switching the DIP switch S24/3 to
0...40 Hz (-1 dB).
Measuring frequency range
0...250 Hz (-1 dB) (factory settings)
0...40 Hz (-1 dB)
6.7

Synchronization

When synchronizing several units of the type ME50S6 one of them has to be
switched as master; its carrier frequency is used for reference. Pins 12c and
15c of all amplifiers concerned must be joined for synchronization. The master
amplifier is selected by switch S28.
Synchronization
Slave amplifier (factory settings)
Master amplifier
ME50S6
A00260_04_Y00_01 HBM: public
Individual Settings
co
S 24/3
S S28
17