Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Normal Patient Positioning
1.
Insert the Normal Bite into the Normal Chinrest and cover it with a Sanitary
Vinyl Cover.
2.
Guide the patient to a chair (sold separately) in the center of the equipment.
3.
Guide the patient to sit in the center of the equipment
4.
Position the patient's back and cervical spine as straight as possible.
5.
Adjust the instrument to the patient's sitting height using the Column UP/DOWN
on the Handle frame or the optional UP/DOWN switch while the patient holds the
handle.
vatech A9 (PHT-30CSS) User Manual
Sanitary Vinyl Cover
Normal Bite
▪
The Sanitary Vinyl Cover is for sole use only. It should be
replaced for each patient. Be sure to use the approved
vinyl cover.
▪
Clean the Chinrest and the Bite with non-alcohol based,
non-corrosive cleaning solution and wipe with a dry towel
before the next patient.
If a chair with a backrest is used, make sure that the
patient's back is away from the backrest of the chair for
proper positioning.
5. Acquiring CBCT Images
61
Werbung
Inhaltsverzeichnis
