VATECH A9 Handbuch Seite 66

5. Acquiring CBCT Images
Chinrest position adjustment
Before patient alignment, adjust the Chinrest position to the CBCT mode. (If the
Chinrest position is already set to CBCT mode, there is no need to adjust again.)
1. Pull the Chinrest attachment part on the handle frame from the machine until the
end of the Chinrest attachment part is printed in "-CBCT-" silk. Pull until you hear
a "click" sound.
60
The installation angle of the Chinrest attachment part may
be distorted by 2 degrees. This is intended for calibration
purposes.
°
2
vatech A9 (PHT-30CSS) User Manual