G) Activating/Deactivating The Alarm Function; H) Setting The Alarm Time - Eurochron EFWS 900 S Bedienungsanleitung

g) Activating/Deactivating the Alarm Function

—
Briefly press the "" (9) or "" (10) button until the display "
—
Briefly press the button "alarm" (6) repeatedly until the desired alarm clock
function appears (see chapter 12. f).
—
The "" (9) or "" (10) buttons are used to switch the selected alarm function
on (alarm time is displayed) or off ("OFF" is displayed).
For the pre-alarm (display "PRE AL") to be switched on or set, the alarm
clock function "
possible.

h) Setting the Alarm Time

—
Briefly press the "" (9) or "" (10) button until the display "
—
Briefly press the button "alarm" (6) repeatedly until the desired alarm clock
function " W" or "
—
Switch on the alarm clock function you just selected (press "" (9) or ""
(10)), so that the alarm time is displayed instead of "OFF" (e.g. "07:00").
—
Press the "alarm" (6) button until the hours of the alarm time start to flash.
Set the alarm time hours with the buttons "" (9) or "" (10) (for quick
adjustment, keep the respective button pressed).
—
Briefly press the "alarm" button (6), the alarm time minutes flash.
Set the alarm time minutes with the buttons "" (9) or "" (10) (for quick
adjustment, keep the respective button pressed).
—
Briefly press the button "alarm" (6) to terminate setting mode.
64
W" or " S" must be set first; otherwise, no pre-alarm is
S" appears (see chapter 12. f).
" flashes.
" flashes.