F) Selecting The Temperature Alarm, Switching The Alarm On/Off; G) Setting The Temperature Value For The Temperature Alarm - Eurochron EFWS 310i Bedienungsanleitung

f) Selecting the temperature alarm, switching the alarm on/off

The outdoor sensor on Channel 1 can be used to set an upper and lower temperature
range; an alarm signal sounds when the temperature exceeds or drops below this
value.
• Briefly press the ▲ or ▼ buttons (3 or 5) repeatedly until the
• Briefly press the ALARM button (9) repeatedly to switch between the upper temperature limit
( icon), lower temperature limit (
• If the or icon is displayed, the respective temperature alarm can be switched on or off
by briefly pressing the ▲ or ▼ buttons.
If the temperature alarm is switched off, "OFF" is displayed.
If the temperature alarm is activated, a temperature value is displayed.
• When the alarm signal sounds (e.g. if you have set +30.0 °C as the upper temperature limit
and the measured value exceeds this limit), the alarm can be stopped by briefly pressing the
ALARM button.

g) Setting the temperature value for the temperature alarm

• Briefly press the ▲ or ▼ buttons (3 or 5) repeatedly until the
• Press the ALARM button (9) once or twice to select the upper temperature limit (
lower temperature limit (
• Briefly press the ▲ or ▼ buttons to turn on the respective temperature alarm.
If the temperature alarm is switched off, "OFF" is displayed.
If the temperature alarm is activated, a temperature value is displayed.
• Press and hold the ALARM button until the temperature value flashes, then release the
button.
• Use the ▲ or ▼ buttons to set the temperature value (press and hold for quick adjustment).
• Briefly press the ALARM button to save your setting and exit the setting mode.
icon) and normal display mode.
icon) menu.
icon flashes.
icon flashes.
icon) or
55