G) Setting Temperature Value For Temperature Alarm; H) Trend Display Temperature And Humidity - Eurochron EFWS 900 S Bedienungsanleitung

g) Setting Temperature Value for Temperature Alarm

—
If you are operating more than one outdoor sensor, select the corresponding
channel (1, 2 or 3) first with the "channel" (7) button. If only one outdoor sensor
is operated, briefly press the button "" (9) or "" (10) repeatedly until the
display " " flashes.
—
Press the "alarm" button (6) one or two times to switch between the upper
temperature limit (icon " ") and the lower temperature limit (icon " ").
—
Switch the respective temperature alarm on (or off) by briefly pressing the button
"" (9) or "" (10).
If the temperature alarm is switched off, "OFF" is displayed.
If the temperature alarm is activated, a temperature value is displayed.
—
Press the "alarm" (6) button until the temperature value flashes; then, release
the button again.
—
Set the temperature value with the buttons "" (9) or "" (10) (for quick
adjustment, keep the respective button pressed).
—
Briefly press the "alarm" button (6) to store the setting and to leave the setting
mode.
h) Trend Display for Temperature and Humidity
The arrow icons next to the indoor/outdoor temperature and the indoor/outdoor
humidity show the respective trend of measured values:
Rising
68
Steady Decreasing