Error Indicators - hanseatic HGVI6086B166901S Gebrauchsanleitung

Error indicators

Code
: It takes too long for the water to fill up
E1
or the outlet hose is blocked
: The heating element is defective
E3
: Water overflow
E4
: Internal fault
Ed
: Fault in the washing control system
Ec
: Motor failure
L4
: Drain pump failure
C4
Troubleshooting table
Solution
Turn the water tap on completely.
Lay out the inlet hose (30) properly and ensure it
is free of kinks (see "Connect the inlet hose" on
page EN-30).
Ensure that the water pressure is correct. See
"Technical specifications" on page EN-43.
Check if the outlet hose (28) is blocked and make
sure that there are no foreign bodies in it.
Have the appliance examined and repaired.
Switch off the tap. Find the gap in the seal (or
have someone find it) and repair the leak (or have
it repaired).
Have the appliance examined and repaired.
Have the appliance examined and repaired.
Have the appliance examined and repaired.
Have the appliance examined and repaired.
page EN-39